MORBEX 4" Rear Drop Lowering Kit 4" Rear Shackle Hanger Fit for Chevy C10 Cheyenne Cab 1979-1987

Precio y disponibilidad de MORBEX 4" Rear Drop Lowering Kit 4" Rear Shackle Hanger Fit for Chevy C10 Cheyenne Cab 1979-1987

$ 4.610.777

0 % de interés sin costos adicionales en 3 cuotas de $ 1.536.926 , pagando con Addi. Obtén tu cupo

🚚

Envío gratis a todo Colombia

Disponible en todos nuestros productos, sin costos ocultos ni mínimo de compra.

Producto agotado temporalmente.

Tiempo de entrega: Entrega internacional estimada de 4 a 7 dias habiles en Colombia.

Agotado

Pago seguro garantizado

Rear 4'' Lowering Drop KitsHanger Shackle Fit For Chevy GMC C10 1973-1987 2WDFitment:Fit For Chevy For GMC C10 PICK UP 2WD SHORT BOX 1973-1987Specification:Package weight : 7kgSurface:Powder coatingPackage Includes:2x Rear 1.5" / 2" Adjustable Drop Powder Coated Steel Shackles2x Rear 2" Drop Powder Coated Gunmetal Gray Steel Leaf SpringNecessary hardware includedInstallation Tips:How to Install a Leaf Spring Hanger?Replacing a leaf spring hanger is rather easy. The leaf spring hanger installation consists of a few simple steps.1. You should lift your truck with a jack and place it onto jack stands.2. Then you should remove the front leaf spring from the hanger.3. Grind off the rivets that are holding the hanger and then hammer them out.4. Bolt the leaf spring hanger kit into the frame where the previous rivet holes were.5. Bolt the leaf spring to the hanger. The tricky part of the installation will be taking the rivets off.How to Install or Replace Leaf Spring Shackles?1. Using a floor jack, raise the rear differential of your vehicle off the ground, Use jack stands under the frame to support the vehicle2. Lower the jack so that the suspension "droops", this will take the weight of the vehicle off the shackle and allow for removal of the mounting bolts3. Remove the lower mounting bolt from the shackle and spring and then lower the axle so that the spring drops out of the shackle4. Remove the upper mounting bolt which attaches the shackle to the mount on the frame then remove the existing shackle5. Insert the new shackle and mounting bolt.6. Leave the bolt loose to allow alignment of the shackle with the spring7. Raise the rear axle and align the spring eye with the shackle. Slowly work the spring back into the shackle, raising the jack a little at a time until the holes in the shackle and the spring eye line up.8.

• Compra segura y envío rápido a todo Colombia
• Garantía Yaxa y soporte experto en tu MORBEX 4" Rear Drop Lowering Kit 4" Rear Shackle Hanger Fit for Chevy C10 Cheyenne Cab 1979-1987
• Atención personalizada por WhatsApp y canales oficiales.