YG-1e5974pelota nariz de carburo Fresas, longitud pulgadas, Stub, Ronda Shank, TiCN Final,, 50grados, Helix, para su uso con todos los materiales, 1

Descripción
The YG-1 E5974TC TiCN-coated carbide stub cut-length ball nose end mill has a 50-degree helix angle and two flutes for high-performance machining on aluminum, stainless steel, and copper. The stub length cutting edges increase tool strength and make it less likely to break in the material being machined. It is best used when depth of cut is shallow. The 50-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes into the material. The tool’s ball nose creates contoured surfaces where sharp corners are not required. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is + 0.0000 to – 0.0010″. The round shank accommodates a range of tool holders. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. YG-1 manufactures drills, taps, end mills, and rotary tooling. The company, founded in 1981, is headquartered in South Korea and has a U.S. office in Vernon Hills, IL.
Características
Adecuado para alto rendimiento mecanizado de aluminio, acero inoxidable, y cobre Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto Rápido (Longitud de corte de bordes aumentar la fuerza de la herramienta, por lo que es menos probable que romper en la herramienta 50-degree Helix ofrece mayor en comparación con el extremo Mills de acción de corte con menor Helix ángulos Revestimiento de nitruro de carbono de titanio (TiCN) lubrica el molino de extremo para la estabilidad y ofrece una mejor resistencia a la abrasión que lata de alta temperatura revestimiento
El número de Modelo (ItemModelNumber)
37595TC
Peso
0.46 Libras
Fabricante es YG-1 Tool Company
Destacados
Adecuado para alto rendimiento mecanizado de aluminio, acero inoxidable, y cobre, Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto, Rápido (Longitud de corte de bordes aumentar la fuerza de la herramienta, por lo que es menos probable que romper en la herramienta, 50-degree Helix ofrece mayor en comparación con el extremo Mills de acción de corte con menor Helix ángulos, Revestimiento de nitruro de carbono de titanio (TiCN) lubrica el molino de extremo para la estabilidad y ofrece una mejor resistencia a la abrasión que lata de alta temperatura revestimiento