YG-1E5022carburo nariz End Mills, pulgadas, Stub longitud, doble End, TiAlN Final, cuadrada, 30Grado Helix, para su uso con Aleaciones de

Descripción
The YG-1 E5022TF TiAlN-coated carbide stub-length double-end square nose end mill has two flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, and cast iron. The double-end design has cutting edges on both ends, allowing a new cutting surface to be substituted when the first shows wear, which doubles the tool’s life compared to single-end square end mills. The stub length increases tool strength and makes it less likely to break in the material being machined. It is best used when depth of cut is shallow. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes into the material. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.The TiAlN coating resists heat better than the uncoated finish, TiN coating, and TiCN coating, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is + 0.0000 to – 0.0012″ for end mills with a different shank and cutting diameter and + 0.0000 to – 0.0020″ for end mills with the same shank and cutting diameter. The round shank accommodates a range of tool holders.End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. YG-1 manufactures drills, taps, end mills, and rotary tooling. The company, founded in 1981, is headquartered in South Korea and has a U.S. office in Vernon Hills, IL.
Características
double-end cuadrado End Mills crear Sharp, unrounded cortes y disponen de bordes de corte en ambos extremos para mayor duración de la herramienta Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto Adecuado para el mecanizado de uso general en acero endurecido y de alta, cromo, níquel y acero de acero y hierro fundido Rápido (Longitud aumenta la fuerza de la herramienta, por lo que es menos probable que romper en la herramienta Revestimiento de nitruro de aluminio de titanio (TiAlN) lubrica el molino de extremo para la estabilidad y la resistencia a la abrasión a altas velocidades de corte de alta temperatura, que ofrece una mejor resistencia al calor que diávolo, estaño, revestimiento y revestimiento TiCN.
El número de Modelo (ItemModelNumber)
32593TF
Peso
4.00 Onzas
Dimensiones
4.3 x 1.1 x 1 pulgadas
Fabricante es YG-1 Tool Company
Destacados
double-end cuadrado End Mills crear Sharp, unrounded cortes y disponen de bordes de corte en ambos extremos para mayor duración de la herramienta, Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto, Adecuado para el mecanizado de uso general en acero endurecido y de alta, cromo, níquel y acero de acero y hierro fundido, Rápido (Longitud aumenta la fuerza de la herramienta, por lo que es menos probable que romper en la herramienta, Revestimiento de nitruro de aluminio de titanio (TiAlN) lubrica el molino de extremo para la estabilidad y la resistencia a la abrasión a altas velocidades de corte de alta temperatura, que ofrece una mejor resistencia al calor que diávolo, estaño, revestimiento y revestimiento TiCN.
La calificación que le dan a YG-1E5022carburo nariz End Mills, pulgadas, Stub longitud, doble End, TiAlN Final, cuadrada, 30Grado Helix, para su uso con Aleaciones de aluminioaluminio, hierro fundido, plásticos, aceroacero Aleaciones, 1, 1 calificación usuarios es de 5.0 sobre 5 estrellas.