SANEI H27F-43 Rubber Stopper for Bath, W Type, Drain Diameter 1.7-1.7 inches (42-44 mm), Double Water Stopper, No Chain, Replacement

Descripción
Product Introduction: Rubber stopper for bathtubs with water stopping both the top and inner diameter sides of the drains for bathtubs. Please be aware that cancellations after order cannot be accommodated.
Características
[W Type for Secure Water Stopper] The rubber stopper side and top lid provide double water stopping effect. Close to the top of the drain and inside to stop water. The side of the rubber stopper is made of soft rubber that adheres well to the drain and stops water Compatible drain size: 1.7 – 1.7 inches (42 – 44 mm) (Depending on the current rubber plug, it may not be able to measure properly, whether it is worn or deformed Please check your drain size. ) (Product Size) Top Lid: 2.2 inches (56 mm), Rubber Stopper: 1.7 inches (43 mm), Bottom of Rubber Stopper: 1.3 inches (33 mm), Thickness of Rubber Stopper: 0.7 inches (17.5 mm) Note: This product cannot be used if there is a cross trash reception within 0.7 inches (18 mm) from the top of the drain. May not be used with tiled bathtubs. Please firmly push the rubber stopper into the drain. It may leak out and cause a fire Accessories: Does not come with a shell. Please purchase separately Country of Origin: Japan Material: Rubber plug: EPDM, Round clasp: Stainless steel Make sure the rubber stopper is pushed into the drain. It may leak out and cause a fire
El número de Modelo (ItemModelNumber)
H27F-43
Peso
1.00 Pounds
Dimensiones
1.97 x 1.97 x 0.79 pulgadas
Fabricante es SANEI(旧社名:三栄水栓製作所)
Destacados
[W Type for Secure Water Stopper] The rubber stopper side and top lid provide double water stopping effect. Close to the top of the drain and inside to stop water. The side of the rubber stopper is made of soft rubber that adheres well to the drain and stops water, Compatible drain size: 1.7 – 1.7 inches (42 – 44 mm) (Depending on the current rubber plug, it may not be able to measure properly, whether it is worn or deformed Please check your drain size. ), (Product Size) Top Lid: 2.2 inches (56 mm), Rubber Stopper: 1.7 inches (43 mm), Bottom of Rubber Stopper: 1.3 inches (33 mm), Thickness of Rubber Stopper: 0.7 inches (17.5 mm), Note: This product cannot be used if there is a cross trash reception within 0.7 inches (18 mm) from the top of the drain. May not be used with tiled bathtubs. Please firmly push the rubber stopper into the drain. It may leak out and cause a fire, Accessories: Does not come with a shell. Please purchase separately, Country of Origin: Japan, Material: Rubber plug: EPDM, Round clasp: Stainless steel, Make sure the rubber stopper is pushed into the drain. It may leak out and cause a fire