Melin Herramienta amg-eb pelota nariz de carburo End Mills, pulgadas, Extra larga duración, Uncoated (acabado brillante), 30Grado Helix, para su uso

Descripción
The Melin Tool AMG-EB-series uncoated (bright) carbide extra-long-length ball nose end mill has two flutes and a 30-degree helix angle for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high cutting depth. The tool’s ball nose creates contoured surfaces, where sharp corners are not required. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a range of materials. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. Cutting diameter tolerance is + 0.000 to – 0.002″. The round shank accommodates a range of tool holders. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Melin Tool manufactures cutting tools such as end mills, countersinks, drills, and thread mills. The company, founded in 1940, is headquartered in Cleveland, OH.
Características
Adecuado para uso general mecanizado en materiales más de dureza media, incluyendo acero, latón, hierro, y materiales de nonferrous Bola nariz End Mills (también llamado extremo de bola) crear superficies de forma ergonómica extra-long-length extremo Mills tienen mayor y bordes de corte puede hacer más corta que long-length extremo Mills Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto Sin revestimiento (brillante) herramientas no tienen tratamiento de superficie o revestimiento adicional para el uso en una variedad de materiales
El número de Modelo (ItemModelNumber)
16179
Peso
0.80 Onzas
Dimensiones
4.1 x 0.5 x 0.3 pulgadas
Fabricante es Melin Tool Company
Destacados
Adecuado para uso general mecanizado en materiales más de dureza media, incluyendo acero, latón, hierro, y materiales de nonferrous, Bola nariz End Mills (también llamado extremo de bola) crear superficies de forma ergonómica, extra-long-length extremo Mills tienen mayor y bordes de corte puede hacer más corta que long-length extremo Mills, Carburo puede funcionar a velocidades más altas que o de alta velocidad, resistente al desgaste y temperaturas altas de corte de acero de cobalto, Sin revestimiento (brillante) herramientas no tienen tratamiento de superficie o revestimiento adicional para el uso en una variedad de materiales