Xuyuan 3 Hotend – Metal Hotend Kit with Brass Nozzles – Printer Repair Accessories Fit for CR-20 PROTronXY X5S TevoAlfawise U20

Descripción
Description:CR10S Hot End’s aluminum shell has an anodized frosted cooling system, which is more durable and durable. Integrated structure, easy to maintain and disassemble. After replacement, you can freely print ABS, nylon, polycarbonate and other consumables with high temperature requirements.If you are facing PLA clogging problem, please try the followings:1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. 2. Increase the extruder acceleration. Check your firmware settings. 3. Reduce the retraction length. It depends on your machine setup.4. Increase the nozzle temperature by 5-10 degrees.5. Do not install the 2 screws for support the heatblcok like the stock hotend on the printer.6. Make sure that there is no  between the heatsink and the heat breaker.Specification:Weight: about 33gPacking size: about 10*15*15cm/3.94*5.91*5.91in (transparent  bag)Applicable models: , S, -3, -3 Pro,  S5, CR- 10 -MINI, CR-20, CR-20 PRO, TronXY X5S, Tevo , Alfawise U20Recommended slicer setting:retraction speed over 80MM/Sretraction length 2.5-4MM/0.10-0.16inPacking List:Throat*1pcsHeat sink*1pcsHeating block*1pcsBrass nozzle 0.4mm*1pcsSilicone sleeve (blue)*1pcsOrange buckle*1pcsNotes: 1. Due to the lighting effects and angles, there is a color difference in the product, please understand.2. Due to manual measurement, there is a tolerance in the product size.
Características
ЮHigh-class Materials – 3 Hotend is made of aluminum, stainless steel and high-quality brass. Support people to use for a long time. It has the characteristics of high temperature , strong and durable. ЮWidely Used – 3 Pro Hotend is suitable for almost all series of and CR printers. S5 / -MINI / CR-20 / CR-20 PRO / TronXY X5S / Tevo / Alfawise U20. High adaptability. ЮEasy to Use – 3 Hot End can replace the stock hardware. Installation is simple and only takes a few minutes to complete. No need to use any other tools. ЮSophisticated Workmanship – Hotend follows strict production standards. You don’t need to change the PTFE tubing as often and require less maintenance. The risk of clogging and uneven extrusion is greatly reduced, giving you consistent output. ЮIdeal Parts – The integrated structure of CR10S Hot End is easy to maintain and disassemble. After replacement, you can freely print ABS, nylon, polycarbonate and other consumables with high temperature requirements. The heat dissipation system on the aluminum shell with anodized frosted is more durable and durable.
Departamento es All
El número de Modelo (ItemModelNumber)
1
Peso
2.00 Pounds
Fabricante es Xuyuan
Destacados
ЮHigh-class Materials – 3 Hotend is made of aluminum, stainless steel and high-quality brass. Support people to use for a long time. It has the characteristics of high temperature , strong and durable., ЮWidely Used – 3 Pro Hotend is suitable for almost all series of and CR printers. S5 / -MINI / CR-20 / CR-20 PRO / TronXY X5S / Tevo / Alfawise U20. High adaptability., ЮEasy to Use – 3 Hot End can replace the stock hardware. Installation is simple and only takes a few minutes to complete. No need to use any other tools., ЮSophisticated Workmanship – Hotend follows strict production standards. You don’t need to change the PTFE tubing as often and require less maintenance. The risk of clogging and uneven extrusion is greatly reduced, giving you consistent output., ЮIdeal Parts – The integrated structure of CR10S Hot End is easy to maintain and disassemble. After replacement, you can freely print ABS, nylon, polycarbonate and other consumables with high temperature requirements. The heat dissipation system on the aluminum shell with anodized frosted is more durable and durable.
El País de Origen (COO, siglas en inglés) o fabricación del producto Xuyuan 3 Hotend – Metal Hotend Kit with Brass Nozzles – Printer Repair Accessories Fit for CR-20 PROTronXY X5S TevoAlfawise U20 es China.