Victor0354sr3120781320Profesional Regulador de CO2Medidor de flujo

Descripción
Victor 0781-0354 SR312-320 Professional Co2 Regulator Flow Meter is specifically designed for use with standard (non-siphoned) carbon dioxide cylinders. Our unique design incorporates aluminum heat sink fins which permit high flow rates without freeze-up or noticeable change in pressure or flow. Designed for CO2 applications (non-siphoned tube cylinders). The high flow CO2 applications (SR 310 100 PSIG) (SR 311/312 100 SCFH) with adequate supply or source. Designed for core wire applications and a machined aluminum body and housing cap. There is a 2 inch gauge, a stem type seat mechanism and a 1.75 inch diaphragm in a fabric reinforced neoprene. The self reseating relief valve is not designed to protect downstream equipment. There is a bronze sintered inlet filter. There is a maximum inlet is 1500 PSIG and a delivery range is 100 SCFH. A regulator equipped with a flow gauge is not accurate when a back pressure in excess of 2 PSIG exists at the outlet. Back pressure is caused by a restriction in the equipment downstream of the flow gauge. Metering valves, kinked hoses or even very long hoses are restrictions that can cause back pressure. In applications where back pressure in excess of 2 PSIG can be expected, a regulator equipped with a flow meter should be used. WARNING: High gas withdrawal rates may cause regulator freeze up and will require cylinder manifolding.
El número de Modelo (ItemModelNumber)
‎0781-0354
Peso
3.49 pounds
Dimensiones
9 x 8 x 3 pulgadas
Fabricante es ‎Victor